OLTC stands for On-load tap changer which is used in Transformer to regulate the output voltage. OLTC is installed inside the transformer main tank. It is operated by a Drive mechanism which is connected to OLTC through a tie rod. Generally, the Drive mechanism is mounted on the outside body of the Transformer. Based on … Read more
mAh stands for milli Ampere hour which defines the total capacity of current a mobile battery can deliver in an hour time. To express the total storage capacity, the mAh rating is used in a mobile battery. A higher mAh rating means a higher storage capacity of the battery. For example, a battery rating of … Read more
DGA (Dissolved Gas Analysis) is an important tool for checking the healthiness of oil-filled power transformers. Power Transformer is important and expensive equipment in Power Transmission and Distribution systems. Periodic checking or testing of the transformer is done to maintain the healthiness of the transformer. Transformer oil is used for insulation and cooling of the … Read more
When the voltage goes higher than the rated voltage is called Over Voltage. It is a very common issue in Power systems. System voltage is to be maintained as per the designed voltage for the stability of the power system. All the equipment and insulators used in substations and transmission lines are designed for a … Read more
After opening the Circuit Breaker under load or fault condition, a transit voltage appears across the breaker contacts which is called Restriking Voltage. Frequency of Restriking voltage goes in kH. During arcing period, transient voltage appears across the contacts at or near current zero. If dielectric medium between the CB contacts is greater than the … Read more
The Corona Effect is the phenomenon of electric discharge in high voltage transmission lines and substations. Hissing noise and violet glow were observed under the corona effect. Power loss, damage to high voltage electrical components, and noise are observed due to corona discharge in the Transmission line. Why does corona effect in transmission line? Due … Read more
Cable lugs are used for termination or connection of cables to the Terminal Box (TB). There are so many types of cable lugs are available based on the cable size. They are mainly copper and aluminum type. Based on the application of the cables, following types of cable lugs are used for cable termination /connection … Read more
DC or Direct Current is electrical current which flows always in one direction. As we know, when electron flows from one place to another place, it is called electric current. Under Direct current, electron flows in one direction. Electron flows from the negative voltage terminal to positive voltage terminal and due to this DC flows … Read more